Shyan School Email Ph : 033 23540452 Musical Books Shopping About us Contact
Luna II - Professional Large-Diaphragm Condenser Microphone

Microphones

 

 

 

 

Top Features

cardioid condenser design > great for vocals, guitar, piano and more
Class A FET electronics > extremely clean sound
3-micron, 1.1” evaporated-gold Mylar diaphragm > ultra-sensitive to musical nuances
large, solid brass capsule > warm, classic sound
10dB pad > accommodates sources up to 140dB SPL
switchable low-frequency roll-off filter > eliminates rumble
The M-Audio® Luna® II professional cardioid studio condenser microphone updates the award-winning Luna mic, acclaimed for superb sound and excellent performance. Designed in the USA and hand-assembled in limited quantities, Luna II delivers vintage look and sound combined with modern Class-A, solid-state electronics for the best of both worlds. The large, 1.1” ultra-thin, 3-micron, evaporated-gold diaphragm with brass capsule captures nuances with incredible detail. The addition of a -10dB pad extends the maximum SPL to 140dB to handle just about any sound source. The inclusion of a switchable low-frequency roll-off filter rounds out a professional microphone that’s great for recording vocals, guitar, piano and more.

Full Features

single-pattern, side-address, cardioid studio condenser microphone
vintage sound, modern technology
Class A FET electronics
ultra-sensitive, 3-micron, 1.1” evaporated-gold diaphragm
large, solid brass capsule
10dB pad
switchable low-frequency roll-off filter (6dB/octave at 125Hz)
no more than +/-1dB variation from published curves
phantom powered
includes shock mount and wooden box

Specifications

type: large-diaphragm condenser
pattern: cardioid
frequency response: 20Hz-20kHz
maximum SPL: 130dB for 0.5% THD
pad: 10dB
LF rolloff filter: 6dB/octave @ 125Hz
sensitivity: -36dB @ 1kHz, 0dB=1V/Pa (-36dBV)
equivalent noise level: 14dB A-weighted
output impedance: 200 ohms
recommended load impedance: > 1,000 ohms
power requirement: > 48V phantom power
connector: 3-pin male XLR
size/weight: 8-1/4”(h) x 3” (w) x 2” (d); 1.4 lbs